As an Amazon Associate I earn from qualifying purchases.
Rainwater Diverter and Filter with link kit, Ideal for Water Butts Black, 3P Filter Collector Universal3P-Technik
- Filters and collects rainwater for the best possible tank water quality. If in any doubt, please contact us or leading online retailers for assistance.
Fits all uk round down-pipes from 68 to 100mm, square 65 to 75mm not just 65 square and 68mm round. Durable high quality plastic body, filter mesh made of stainless steel. Additional items included with the universal filter collector: 32mm drill bit, 30cm of 1.
25" medium duty hose, 25-38mm hoseclip, 1"-32mm hosetail, 1" rubber ring seal and 1" backnut. The filter collector can be fitted on its own using a rubber grommet. The filter collector universal this product has all the required fittings with a back-nut to fit inside a tank. Once the tank is full the filter acts as the overflow outlet.
COSTWISE low pressure water butt/tank cleanable in-line water filterCOSTWISE
- Use with waterbutts. All items work on low pressure. Complete system on listing. Adjustable drippers on spikrs. Full range.
Adgbd IBC Tank Adapter With Filter Water Pipe Tap Cap Thread Connector Replacement Valve Fitting Course Threaded Storage Tank Cover Tap Water Butt Storage Tank Hose, Pipe Joint Elbowadgbd
- Non-toxic, environmental, safe to use. The filter can absorb coarse dirt, such as leaves left by rain. There is also a fine filter made of aluminum fiber in the filter basket. You can remove the cleaning filter and use it repeatedly, and remove the filter basket at the bottom of the faucet.
When constructing a rainwater collection system with an inlet through a drain or downpipe, it is essential that our house has a filter connector. 5 sizes to choose from, suitable for most ton barrels.
Rainwater Diverter & Filter, Ideal for Water Butts Grey, 3P Filter Collector3P-Technik
- Once the tank is full the filter acts as the overflow outlet. Filters and collects rainwater for the best possible tank water quality. Durable high quality plastic body, filter mesh made of stainless steel. The filter collector this product is suitable to push fit into water butts.
If you require hose, backnut & fittings the filter Collector Universal available on a different product page would be the most suitable option. If in doubt please get in touch. Fits all uk round down-pipes from 68 to 100mm, square 65 to 75mm not just 65 square and 68mm round.
|Height||27 cm (10.63 Inches)|
|Length||0 cm (0 Inches)|
|Width||26.01 cm (10.24 Inches)|
5. 3P Technik Filtersysteme
Storage Rain Gauge Downpipe Filter with Tap for Downpipes with a Diameter Of 68-100 mm and Square Downpipes Sized 60 x 60 mm for Filling Water Butts, Brown, Rain Barrels and Rain Tanks3P Technik Filtersysteme
- The excess rain water drains off via the storage rain gauge in the downpipe. The different dimensions of the downpipes are indicated by indentations on the upper side. Please note the assembly instructions cannot guarantee these are in English.
The overflow function in the storage rain gauge prevents the water butt from overflowing when the maximum filling level is reached. We recommend using the storage rain gauge on roofs of up to 50 m².
It can remain mounted on the downpipe all year round. This downpipe filter is suitable for installing in metal downpipes with diameters ranging from 68 cm to 100 mm, as well as for square downpipes with the dimensions 60 x 60 mm.
The brown storage strain gauge with tap is a rain water filter or downpipe filter which holds back coarse debris such as leaves, moss and branches and collects rain water for filling water butts, rain barrels and rain tanks. Our rain water filter is equipped with a stopcock so the water supply to the water butt or rain water tank can be regulated or turned off completely in winter.
6. Garden Magic
Rainwater Harvesting, Technik Rainwater Filter Collector Universal Black, Outdoor Garden IrrigationGarden Magic
- The filter collector universal is the 3p filter collector supplied with a Universal Fixing kit. This comprises 30cm of flexible hose to act as a connector plus hosetail, rubber sealing washer, backnut, and a flatbit 32mm for cutting a hole in your tank or water butt.
3p technik Rainwater Filter. Available in four colours, Black, Brown, Grey and White. This is a superbly engineered filter, not just a basic diverter. The filter collector universal can be connected to any tank with a lid or other access point where you can reach inside the tank to tighten up the back nut to the hosetail.
7. 3P Technik Filtersysteme
Rain Gauge Downspout Filter for downpipes of 68 – 100 mm Diameter and Standard Brown Square Gutter with 60 x 60 mm to fill water butt Rain Barrels and Memory3P Technik Filtersysteme
- Please observe the assembly instructions. The rain gauge standard in the colour brown is a rain water filter or downpipe filter, moss and branches Zurückhält and the rain water for the filling of water butt, which coarse debris such as leaves, rain barrels and to suit flash gather.
Simple rain gauge with plastic coarse filter, the most applicable rainwater from the downpipe filters and into the water butt into the air.
We recommend the rain Thief for use on roof of up to 50 m². The overflow function of diverter kit to prevent the water butt, when the max fill level is achieved. We recommend the connection set 32 mm for attachment of the downpipe filter and water butt or rain storage.
These fall pipe filter suitable for installation in steel tubes with a diameter of 68 cm to 100 mm, as well as for square downpipes with the dimensions: 60 x 60 mm downpipes the different dimensions are on the top with the recesses Angedeutet. The excess rain water flows through the rain gauge in the downpipe.
Drain Tap, Dellonda Collapsible Fold Up PVC Garden/Hydroponics Water Butt with Zipped Lid, Filter 100LDellonda
- Installed with an overflow pipe which can accommodate a hose to direct the overflow. Water tank is fitted with a drain tap, 1/2" thread insert, 3/4" ABS outlet valve, thread filter, thread plug and overflow/inlet fitting.
Durable corrosion and UV resistant PVC cover. Some simple assembly is required. Effortless installation with no tools needed.
100l capacity water barrel for collecting rain water from a rooftop gutter. Overall tank size: Ø40 x 78cm. Zipped lid fitted at the top to keep the water clean after collection. Includes five standing poles, fitted with adjustable feet to provide good stability.
9. 3P Technik Filtersysteme
3P Technik Filter Systems Rain Water Filter Rain Collector Standard Grey for Downpipes Diameter 68-100 mm and Square Drop Pipes with 60 x 60 mm for Filling Rain Barrels and Rainwater Barrels3P Technik Filtersysteme
- The overflow function in the storage rain gauge prevents the water butt from overflowing when the maximum filling level is reached. - -. This downpipe filter is suitable for installing in metal downpipes with diameters ranging from 68 cm to 100 mm, as well as for square downpipes with the dimensions 60 x 60 mm.
Simple rain collector with plastic coarse filter, which filters the rainwater from the downpipe and directs it into the water butt.
The different dimensions of the downpipes are indicated by indentations on the upper side. The excess rain water drains off via the storage rain gauge in the downpipe.
Please note the assembly instructions cannot guarantee these are in English. We recommend using the storage rain gauge on roofs of up to 50 m². The standard rain collector in grey is a rainwater filter or Downpipe filter which holds coarse dirt such as leaves, moss and branches and collects the rainwater for filling water buttocks, rain barrels and rain reservoirs.